4-4
Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by selecting [
Manual RX
] after confirming that the telephone line has
connected to the sending system.
Flow of reception
1
The telephone rings.
When there is an incoming call, the telephone connected to the machine makes a ringing tone.
2
Lift the handset.
Lift the handset of the telephone.
3
Check if the telephone line has connected to the fax of the sending
system.
If the destination is a fax machine, you will hear soft beep sounds. If a person answers,
you can talk to that person.
4
[FAX] on the Home screen > [On Hook] > [Manual RX]
Reception will start.
5
Replace the handset.
When reception starts, return the handset to its original position.
NOTE
To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode,
refer to the following:
Connecting a telephone set (commercially available product) to this machine enables you to receive originals after
talking to the person at the sending system.
Remote Switch Function (page 5-36)
NOTE
When using a telephone set that can send tone signals, use the telephone to start the
reception of originals with the remote switch function.
Содержание d-COLORMF3024
Страница 1: ...Code 597300en d COLORMF3024 FAX OPERATION GUIDE...
Страница 190: ......