manualshive.com logo in svg

Olivetti d-COLOR P2026, Руководство по обслуживанию, Страница: 70 / 207

Поделиться
Скачать
Olivetti d-COLOR P2026 Скачать руководство пользователя страница 70

 

 

 Check procedures/

 

corrective measures

 

Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,

 

replace the cable.

 

Fuser pressure release motor and engine

 

PWB (YC38)

Check if the rollers and gears rotate

 

smoothly. If not, grease the bushes and

 

gears. Check for broken gears and replace if

 

any.

Replace the fuser pressure release motor.

Code

 

2340

 

Contents

 

Fuser pressure release

 

motor time-out error

 

When the fuser pressure

 

release motor is driven, the

 

envelope switch (EVSW) is

 

not detectable for 6 s.

 

Causes

Defective connec-
tor cable or poor

 

contact in the con-

 

nector.

Defective drive
transmission sys-

 

tem of the fuser

 

pressure release

 

motor.

Defective fuser
pressure release

 

motor.

Defective engine
PWB.

Replace the engine PWB and check for cor-
rect operation (see page 1-5-26).

 

Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,

 

replace the cable.

 

Paper feed motor and engine PWB (YC3)

Check if the rollers and gears rotate

 

smoothly. If not, grease the bushes and

 

gears. Check for broken gears and replace if

 

any.

Replace the paper feed motor.

 

Replace the engine PWB and check for cor-
rect operation (see page 1-5-26).

 

Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,

 

replace the cable.

 

PF paper feed motor and PF main PWB

 

(YC6)

Check if the rollers and gears rotate

 

smoothly. If not, grease the bushes and

 

gears. Check for broken gears and replace if

 

any.

2500

 

Paper feed motor error

 

The drum motor ready input is

 

not given for 5 s during the

 

paper feed motor is ON.

 

Defective connec-
tor cable or poor

 

contact in the con-

 

nector.

Defective drive
transmission sys-

 

tem of the paper

 

feed motor.

Defective paper
feed motor.

Defective engine
PWB.

2600

 

PF paper feed motor error

 

(paper feeder 1)

 

The drum motor ready input is

 

not given for 2 s during the PF

 

paper feed motor is ON.

 

Defective connec-
tor cable or poor

 

contact in the con-

 

nector.

Defective drive
transmission sys-

 

tem of the PF

 

paper feed motor.

Defective PF paper       Replace the PF paper feed motor.

 

feed motor.

Defective PF main
PWB.

Replace the PF main PWB (Refer to the ser-
vice manual for the paper feeder).

 

1-4-16

Содержание d-COLOR P2026
















































































































































































































Отзывы:

Нет отзывов