4.2.18 Plate shield rear
(1)
Remove the left side cover. (See Subsection 4.2.1)
(2)
Remove the right side cover. (See Subsection 4.2.2)
(3)
Remove the rear cover. (See Subsection 4.2.3)
(4)
Remove the top cover assembly. (See Subsection 4.2.5)
(5)
Remove the color registration assembly. (See Subsection 4.2.17)
(6)
Remove the plate shield front. (See Subsection 4.2.16)
(7)
Remove the low voltage power supply. (See Subsection 4.2.22)
(8)
Remove the TB3 board (main board.) (See Subsection 4.2.23)
(9)
Remove two screws (silver)
1
to remove the plate heat
2
.
(10) Remove latches of the gear lift up
3
to detach a shaft
4
.
(11) Remove three screws (silver)
5
to remove the plate shield rear
6
.
Figure 4-2-18 Plate shield rear
6
2
1
3
5
4
5
5
3
1
3
Rear
Link-LiftUp-L
*Precautions for assembly
Gear lift up
shall be assembled after
Link-LiftUp-L and Link-LiftUp-R are slided
to the rear direction until bumping.
72
d-Color P116 Service Manual
Y110260-4