5.3.9 Indication of printed page counters
This self-diagnosis is practiced to indicate the current number of printed pages of the printer.
1.
Activate the normal self-diagnostic mode, and press and hold down the [MENU+] key or [MENU-
] key, until "PRINTER STATUS" appears in the display section, and then, press the ENTER
key. (The MENU+ key increments a test item, and the MENU- key decrements a test item.)
2.
Pressing the [MENU+] key or [MENU-] key causes the current number of printed pages to be
displayed sequentially. (ONLINE and CANCEL keys inactive to pressing)
3.
Press the [BACK] key to terminate the test. (Status of Item 1 restored)
5.3.10 Factory/Shipping switching
This self-diagnosis is practiced to switch the PU between the Factory mode and the Shipping
mode.
1. Activate the self-diagnostic (Level 1) mode, and press and hold down the [MENU+] key or
[MENU-] key, until the following message appears.
2. Pressing the [ENTER] key causes the following message to appear. Press and hold down the
[MENU+] key or [MENU-], until the intended item (See the table below) is displayed.
3. Pressing the [ENTER] key while the desired set item remains displayed selects the set value.
4. Pressing and holding down (3 sec) the [ENTER] key while the value you want to set remains
displayed registers the currently displayed value on the EEPROM. Then, the status of Item 2
will be restored.
5. Repeat Items 2 to 4, as needed.
FACTORY MODE SET
FACTORY MODE
SHIPPING MODE *
Display Lower
********IMAGES
********IMAGES
********IMAGES
********IMAGES
********COUNTS
Display Upper
K-IMPRESSIONS
Y-IMPRESSIONS
M-IMPRESSIONS
C-IMPRESSIONS
TOTAL SHEET CNT
Format
DEC
DEC
DEC
DEC
DEC
Unit
Images
Images
Images
Images
Prints
Function
The printing number of sheets of each
color.
The indication of the total printing
number of sheets
Y110260-4
d-Color P116 Service Manual
113