Olivetti d-Color MF920, Руководство по обслуживанию

Страница: 144 / 332

3-20
Service Manual
•
Unless the menu is in DIAGNOSTICS,
Check Config ID
displays.
To set the configuration ID:
1.
Select PRINTER SETUP from DIAGNOSTICS, and press Select ( ).
2.
Select Configuration ID , and press Select ( ).
T
he current value for Configuration ID 1 appears with the left character or digit underlined.
3.
Enter the Configuration ID 1.
•
Change the left character or digit first.
•
To change a character or digit, press to decrease or to increase the underlined value, and
press Select ( ).
•
To move to the next character or digit, press or , and press Select ( ).
•
When you press Select ( ) on the last digit, the value will be submitted.
If
Invalid ID
appears, the entry is discarded, and the previous Configuration ID 1 is displayed on
the screen.
If the process is successful,
Submitting Selection
appears on the display, followed by the
current value for Configuration ID 2.
4.
Repeat the steps for entering the Configuration ID 2, and press Select ( )
.
If the Configuration ID 2 is validated,
Submitting Selection
appears, and a check ( ) appears next
to Printer Setup .
5.
Restart the printer. A POR is not automatically performed.
ITU Barcode
The 16-digit numeric value matches the ITU installed in the printer. If you replace the ITU, re-enter this value.
Stop ( ) exits the menu.
To enter the ITU barcode:
1.
Select PRINTER SETUP from Diag Menu, and press Select ( ).
2.
Select ITU Barcode , and press Select ( ).
3.
To enter the 16-digit numeric value:
Use
to decrease the leftmost digit value or to increase the value. press Select ( ) to advance
to the next digit. If a digit is already correct, press Select ( ) to accept the number and to continue.
When the last number is entered and you press Select ( ),
Submitting changes…
should
appear. if the entered number is incorrect,
Check Sum Does Not Match
displays. Check and re-
enter the number.
Enable Edge to Edge Copy
This setting is set to either on or off. Off is the default setting.
Y112730-2