manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 687 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 687

Field Service Ver. 2.0 Jul. 2009

14. BILLING SETTING

627

ADJUSTMENT

 / SETTING

14.3 Billing Setting

14.3.1

Counter Setting

A. Use

• To set the counting method for the total counter, size counter and long length paper 

counter.

• To set the size regarded as the large size (2 counts.)
• Use to change the counting method for the counters.

B. Procedure
(1) Total Counter

Mode 1 : 1 count per 1 copy cycle (Default: Japan)
Mode 2 : Large size is double counts

(Default: US, Europe, Others 1, Others 2, Others 3, Others 4)

NOTE
• The content of this setting is reflected in the count method with the key counter. 
• “Others 1” to “Others 4” are setting items in [Marketing Area] available from Ser-

vice Mode.

See P.523

(2) Size Counter

• A3/11 x 17

: When it exceeds 279 mm in the main scan direction 

and 420 mm in the sub scan direction (exceeds 399 
mm at fax scan), it is regarded as the large size.

• A3/B4/11 x 17/8 

1

/

2

 x 14

: When it exceeds 215 mm in the main scan direction 

and 355 mm in the sub scan direction (exceeds 337 
mm at fax scan), it is regarded as the large size.

• A3/11 x 17/B4/8

1

/

2

 x 14/Foolscap : When it exceeds 203 mm in the main scan direction 

and 330 mm in the sub scan direction (exceeds 313 
mm at fax scan), it is regarded as the large size 
(However the size in the main scan direction changes 
according to the foolscap size setting.)

• Not counted (Default: Japan)
• A3 and 11 x 17 (Default: US)
• A3, B4, 11 x 17, and 8

1

/

2

 x 14 (Default: Europe, Others 1, Others 2, Others 3, Others 4)

• A3, B4, Foolscap, 11 x 17, 11 x 14, and 8

1

/

2

 x 14

✽ 

Count-up table

0: No count; 1: 1 count; 2: 2 counts; 3: 3 counts; 4: 4 counts

Print mode

1-Sided

2-Sided

Size

Sizes other than 

those specified

Specified 

sizes

Sizes other than 

those specified

Specified 

sizes

Mode

Mode

Mode

Mode

Mode

1

2

1

2

1

2

1

2

Total

1

1

1

2

2

2

2

4

Size

0

0

1

1

0

0

2

2

2-sided  Total

0

0

0

0

1

1

1

1

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов