manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 675 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 675

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

615

ADJUSTMENT

 / SETTING

12.17 Internet ISW

• By using this setting, the firmware stored in the server can be downloaded over internet 

for upgrading.

• For details for upgrading the firmware, refer to “Firmware upgrade” in the Maintenance 

section.

See P.231

12.17.1

Internet ISW Set

A. Use

• To set whether or not to enable each setting for Internet ISW.
• To use when upgrading the firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to “ON”.

NOTE
• When the following setting is set to “ON”, this setting will automatically be set to 

“OFF” and cannot be changed. 
[Administrator Settings] 

o

 [Security Settings] 

o

 [Enhanced Security Mode]

B. Procedure

• The default setting is OFF.

ON

“OFF”

12.17.2

HTTP Setting

• It will be displayed only when [Internet ISW Set] is set to “ON”.

12.17.3

HTTP Setting-Data Input Setting

A. Use

• To set whether or not to enable downloading using the HTTP protocol.
• To use when accessing the server using the HTTP protocol.
• Setting on the proxy server will be valid when this setting is “ON”.

B. Procedure

• The default setting is OFF.

ON

“OFF”

12.17.4

HTTP Setting-Connect Proxy

A. Use

• To set whether or not to connect via proxy server when accessing the server.
• To use when accessing the server via proxy server.

B. Procedure

• The default setting is OFF.

ON

“OFF”

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов