Olivetti d-color MF651, Руководство по обслуживанию, Страница: 658 / 1053

12. SERVICE MODE Field Service Ver. 2.0 Jul. 2009
598
ADJUSTMENT
/ SETTING
12.16.2 FS-FN adjustment - Half-Fold Position
A. Use
• Use this adjustment to adjust the half-fold position in half-fold printing.
B. Procedure
1. Place two sheets of originals on the ADF.
2. Make a copy in the folding mode.
3. Fold the copies along the crease.
4. Measure the amount of deviation (A).
Specification A: 0 ± 1.0 mm
Adjustment range: -10.0 mm to +10.0 mm (1 step: 0.1 mm)
5. If (A) is out of the specified range, make the following adjustment.
6. Call the Service Mode to the screen.
7. Touch [Finisher]
o
[FS-FN adjustment]
o
[Half-Fold Position].
8. Touch the paper size where half-fold position is adjusted.
9. Look at the copy and adjust the half-fold position with the [+]/[-] key.
10. Press the Reset key.
11. Touch [Exit] on the Service Mode screen.
12. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
13. Make another set of copy sample and check the amount of deviation (A).
A11PF3C502DA
A
Exit direction
A11PF3C503DA
Service Manual Y110571-1