manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 603 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 603

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

543

ADJUSTMENT

 / SETTING

B. Procedure

1.

Save logo data that conforms to the above specifications in the root directory of a USB 
memory device.

NOTE
• Be sure to save data in the root directory as the machine cannot detect data saved 

in other directories.

2.

Connect the USB memory device to the machine USB port.

3.

Select the key as follows. 
[System 2] 

o

 

[

] 

o

 [BootUp Screen].

4.

Touch [Set].

5.

Check result “OK” is displayed and touch [END].

NOTE
• If logo data is already registered, new logo data overwrites the existing logo data.
• The color of logo data may look different between the machine control panel and 

some PC screens. After registering logo data, restart the machine and check the 
color of the logo data on the BootUp screen.

* To delete registered data, touch [Delete] and check result “OK” is displayed.

12.9.23

Install Data

A. Use

• To install movie help data or OCR dictionary data into HDD.
• To use when the logical format of the hard disk is performed.
• To install each data into the machine HDD via USB memory device.

B. Procedure

NOTE
• To use OCR function, the optional i-Option LK-105 must be activated.

1.

Save data (*.tar) into the root directory of a USB memory device.

2.

Connect the USB memory device to the machine USB port.

3.

Select the key as follows.
[System 2] 

o

 

[

] 

o

 [Install Data].

4.

Touch [Movie Data] or [OCR Dictionary].
You can select the above two types of data at a time and install them.

5.

Touch [Set].

6.

Press the Start key to install the data.

7.

Check result “OK” is displayed and touch [END].

NOTE
• If data is already installed, it is necessary to delete old data before installing new 

one.

* To delete registered data, select the data to be deleted and touch [Delete]. Check result

“OK” is displayed.

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов