manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 523 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 523

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

463

ADJUSTMENT

 / SETTING

12.4.3

Fusing Transport Speed

A. Use

• To adjust the speed of the fusing motor so as to match the fusing speed with transport 

speed.

• Brush effect or blurred image is evident as a result of changes in environmental condi-

tions or degraded durability.

B. Procedure

1.

Call the Service Mode to the screen.

2.

Touch these keys in this order: [Machine] 

o

 [Fusing Transport Speed].

3.

Select the transport speed, at which the brush effect or blurred image has occurred.

<

d-Color

 

MF

65

1

>

<

d-Color

 

MF

55

1

>

<

d-Color

 

MF

45

1

>

4.

Enter the new setting from the 10-key pad.
If brush effect is evident, vary the setting value and check for image.
If a blurred image occurs, decrease the setting.

5.

Touch [END] to validate the adjustment value.

6.

Check the print image for any image problem.

Transport speed

Paper Setting

310 mm/s

Plain paper: black (High speed)

240 mm/s

Plain paper: black (Middle speed), color (Not glossy)

155 mm/s

Thick 1, Thick 1+: black/color

120 mm/s

Plain paper: color (Glossy)
Thick 2, Thick 3, Thick 4, envelope, postcard: black/color
OHP film: black

Transport speed

Paper Setting

264 mm/s

Plain paper: black (High speed)

216 mm/s

Plain paper: black (Middle speed), color (Not glossy)

132 mm/s

Thick 1, Thick 1+: black/color

108 mm/s

Plain paper: color (Glossy)
Thick 2, Thick 3, Thick 4, envelope, postcard: black/color
OHP film: black

Transport speed

Paper Setting

216 mm/s

Plain paper: black, color (Not glossy)

132 mm/s

Thick 1, Thick 1+: black/color

108 mm/s

Plain paper: color (Glossy)
Thick 2, Thick 3, Thick 4, envelope, postcard: black/color
OHP film: black

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов