manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 452 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 452

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

392

ADJUSTMENT

 / SETTING

H. S/MIME Communication Settings-Certificate Verification Level Settings)
(1) Use

• To verify the server certificate, configure settings to verify the certificate.

(2) Procedure

Expiration Date

: Select whether to check that the server certificate is 

within the validity period.

Key Usage

: Select whether to check that the server certificate is 

used according to the purpose approved by the issuer.

Chain

: Select whether to check that the server certificate chain 

(certification path) is correct.
The chain is validated by referencing the external certif-
icates managed on this machine.

Expiration Date Confirmation : Select whether to check that the server certificate is 

within the validity period.
The OCSP service and CRL (Certificate Revocation
List) are checked in this order when the expiration date 
of the certificate is checked.

10.6.43

Network Setting-SNMP Setting

A. SNMP Setting
(1) Use

• To set whether to use SNMP (Simple Network Management Protocol) or not.
• To set the SNMP version to be used.
• To readout management information base and to enter community name for writing.

(2) Procedure

• The default setting is ON.

“ON”

OFF

• To individually set whether or not to use SNMP v1/v2c (IP), SNMP v3 (IP), and SNMP v1

(IPX).

• The default setting is ON.

“ON”

OFF

B. UDP Port Number
(1) Use

• To set the UDP standby port number which is used for SNMP (IP).

(2) Procedure

1.

Touch the Clear key.

2.

Enter the port number between 1 and 65535 using the 10-key pad.

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов