manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 440 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 440

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

380

ADJUSTMENT

 / SETTING

G. WINS Settings: Automatic Retrieval Settings
(1) Use

• To set whether or not to enable the auto obtaining of the WINS server address.
• To acquire the WINS server address automatically.
• To obtain the WINS server address from DHCP server. If there are more than on address 

settings, up to two can be acquired.

(2) Procedure

• The default setting is Enable.

“Enable”

No Limit

H. WINS Settings: WINS Server Address 1, 2
(1) Use

• To set the WINS server address.
• To use when manually entering the WINS server address.
• The primary address and the secondary address can be set. 

(The primary address has the priority during operation.)

(2) Procedure

• Touch [1] or [2].
• Enter the WINS server address.

I.

WINS Settings: Node Type Setting

(1) Use

• To set a node type.

(2) Procedure

• The default setting is H Node.

B Node

P Node

N Node

“H Node”

J.

Direct Hosting Setting

(1) Use

• To set whether or not to enable the direct hosting setting.

(2) Procedure

• The default setting is ON.

“ON”

OFF

10.6.41

Network Setting-LDAP Settings

• It will not be displayed when the following setting shows that authentication device is 

mounted.
[Service Mode] 

o

 [Billing Setting] 

o

 [Management Function Choice]

A. Enabling LDAP
(1) Use

• To set whether to enable or disable the LDAP function.

(2) Procedure

• The default setting is OFF.

ON

“OFF”

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов