manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 413 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 413

Field Service Ver. 2.0 Jul. 2009

10. UTILITY

353

ADJUSTMENT

 / SETTING

10.6.20

Administrator/Machine Settings-Input Machine Address

A. Use

• To register the name of the machine and e-mail address.

Machine Name : When the file name of the transmitted file or the document name of 

document registered in Box is generated automatically, it is added.

E-mail

: To be used as from address at internal Fax transmission.

B. Procedure

1.

Touch [Device Name] and input the name.

2.

Touch [E-mail Address] and input the E-mail address.

10.6.21

One-Touch/User Box Registration-Create One-Touch Destination

A.  Address Book
(1) E-mail
<Use>

• To register/change the e-mail address for transmitting the scanned data by e-mail.

<Procedure>

• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.

(2) User Box

• It will not be displayed when the following setting shows that authentication device or the 

vendor is mounted.
[Service Mode] 

o

 [Billing Setting] 

o

 [Management Function Choice]

<Use>

• To register or change the box address for storing the scanned data to the box in the hard 

disk of the machine.

<Procedure>

• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.
• At least one user box must be registered in order to register the box address.

(3) Fax
<Use>

• To register or change the fax number for transmitting the fax.

<Procedure>

• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.

(4) PC (SMB)
<Use>

• To register or change the SMB address for transmitting the scanned data by SMB.

<Procedure>

• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов