Olivetti d-color MF651 Скачать руководство пользователя страница 402 | Manualshive

Страница: 402 / 1053

Olivetti d-color MF651 Скачать руководство пользователя страница 402

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

342

ADJUSTMENT

/ SETTING

K. Line Detection
(1) Prior Detection Setting
<Use>

• To set whether or not to perform pre-detection of stain on the ADF original glass.
• To set the detection level of the pre-detection of stain on the ADF original glass.
• To set how to display the warning when stain on the ADF original glass is detected.
• Use when changing the display of the warning which requests the cleaning of the stain

on the glass detected by the pre-detection of the lines.

TYPE1 : Warning will be displayed by the maintenance mark. (warning code: D-1/D-2)
TYPE2 : Warning will be displayed on the message area on the basic screen.
TYPE3 : Warning will be displayed on all screens.
OFF

: Warning will not be displayed.

• Use when changing the detection level for the pre-detection of stain on the original glass.

Low

: Stain on the glass will not be detected easily.

Normal : Normal detection level
High

: Stain on the glass will easily be detected.

<Procedure>

• The default setting is Yes.

“Yes”

No

NOTE
• [Warning Level] and [Detection Level] can be set when “Yes” is selected.
• Be aware that selecting “No” and performing the pre-detection with the following

setting will display “NG.”
[Service Mode]

o

[Machine]

o

[Split Line Prior Detection]

• When “No” is selected, the original glass cleaning operation after the job ends

does not operate.

<Warning Level>
• The default setting is TYPE2.

TYPE1

“TYPE2”

TYPE3

OFF

<Detection Level>
• The default setting is Std.

Low

“Std.”

High

(2) Feed Cleaning Settings
<Use>

• To set the operation for detection and removing operation of stain on the ADF original

glass when feeding the original.

• Use when changing the operation for detection and removing operation of stain on the

ADF original glass when feeding the original.

Do not remove : The glass will stop moving when the original is fed, and will not per-

form removing the stain.

Remove

: The glass will move between originals when feeding the original.

<Procedure>

• The default setting is Remove.

Do not remove

“Remove”

Service Manual Y110571-1

«
...
400
401
402
403
404
...
»

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов