Olivetti d-color MF651, Руководство по обслуживанию, Страница: 390 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
330
ADJUSTMENT
/ SETTING
(3) Image Stabilization Setting
<Use>
• To change the type and timing of image stabilization.
• To provide the desirable image stabilization control that depends on customer’s machine
usage pattern, i.e. the ratio of color to black print.
Standard : This mode is suitable for low-volume users and reduces the
number of times image stabilization is carried out when the
main power switch is turned ON.
If the change of absolute humidity is detected during warm-up,
normal stabilization is performed during warm-up.
Color Priority : This mode is suitable for high-volume and high ratio of color
print users.
Color stabilization sequence is performed unconditionally
when the main power switch and the sub power switch are
turned ON.
Black & White Priority : This mode is suitable for users who use mainly black print and
use less color print. It provides monochrome stabilization and
reduces the number of times image stabilization is carried out
when the main power switch is turned ON. If the change of
absolute humidity is detected during warm-up, monochrome
stabilization is performed during the warm-up and color stabili-
zation is performed before color printing.
<Procedure>
• The default setting is Standard.
“Standard” Color Priority Black & White Priority
F. Paper Separation Adjustment
(1) Use
• For duplex printing of thin paper, the paper separation position is adjusted for the first
and second sides of paper.
• To adjust the balance between paper separation and image transfer performances by
changing the paper separation position in duplex printing of thin paper (64 g/ m
2
) in hot
and humid conditions.
(2) Procedure
• The default setting is 0.
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Paper Separation Adjustment].
3. Select [Front] or [Back].
4. Change the setting value with [+] or [-] key.
Priority on paper separation performance: Increase the setting value
Priority on image transfer performance: Decrease the setting value
5. Touch [OK] to determine the adjusted value.
6. Make a print and check the image.
Service Manual Y110571-1