manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 351 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 351

Field Service Ver. 2.0 Jul. 2009

10. UTILITY

291

ADJUSTMENT

 / SETTING

10.5.40

Scan/Fax Settings-Default Scan/Fax Settings

• This menu is unavailable if user authentication is not made while either of authentication 

devices is set to set in the [Service Mode] 

o

 [Billing Setting] 

o

 [Management Function

Choice].

• This menu is not available when the key counter is set or when a warning appears to 

inform that the vendor’s main power switch needs to be checked or coins (a card) are not 
inserted under the condition where the vendor is set to Set in the [Service Mode] 

o

 [Bill-

ing Setting] 

o

 [Management Function Choice].

A. Use

• To make default settings for the fax/scan mode.

* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.

B. Procedure

<Current Setting>
• The settings made on the control panel before entering the setting menu screens are 

registered as the default settings of fax/scan functions.

<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default

settings of fax/scan functions.

10.5.41

Scan/Fax Settings-Default Enlarge Display Settings

• Displayed only when you select [Utility/Counter]

o

 [User Settings] 

o

 [Scan/Fax Settings] 

in the enlarge display mode.

A. Use

• To make default settings for the enlarge display mode.

* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.

B. Procedure

<Current Setting>
• The settings made on the control panel before entering the setting menu screens are 

registered as the default settings of fax/scan functions.

<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default

settings of fax/scan functions.

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов