Olivetti d-color MF651 Скачать руководство пользователя страница 338

Страница: 338 / 1053

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

278

ADJUSTMENT

/ SETTING

B. Output Tray Setting

• It will be displayed when the optional finisher FS-526/527 or the job separator JS-504 is

mounted.

(1) Use

• To set the priority output tray for each application (Copy print, Printer, Fax and Print

Reports).

(2) Procedure

• The default settings are as follows.

Copy

: Tray 1

Report Output : Tray 2
Fax

: Tray 2

• [Tray 3] will be displayed only when the job separator JS-603 is mounted to the finisher

FS-527.

10.5.7

System Settings-AE Level Adjustment

• It will be displayed only when the following setting is set to “Level 2.”

[Administrator Settings]

[Security Settings]

[Administrator Security Levels]

• It will not be displayed when the following setting shows that authentication device or the

vendor is mounted.
[Service Mode]

[Billing Setting]

[Management Function Choice]

(It will be displayed when the key counter is mounted.)

A. Use

• To set the default setting for AE (Auto Exposure) The larger the value becomes the more

emphasized the background will be.

To make the background level foggier

: Increase the setting value

To make the background level less foggy : Decrease the setting value

B. Procedure

• The default setting is 2.

“2” (0 to 4)

10.5.8

System Settings-Auto Paper Select for Small Original

A. Use

• To make the copy setting when the paper is undetectably small, or no original is being

set.

• To copy the original such as business cards with which the original detection is not effec-

tive.

Copy on Small Size : Copies on A5 paper.
Copy on A4/Letter : Copies on A4 or Letter (8

x 11) size paper.

Prohibit Copy

: Does not copy since the original size cannot be detected. paper

feed tray needs to be selected prior to pressing the Start key.

B. Procedure

• The default setting is Prohibit Copy.

Copy on Small Size

Copy on A4/Letter

“Prohibit Copy”

Service Manual Y110571-1

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 338 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: