Olivetti d-color MF651 Скачать руководство пользователя страница 911

Страница: 911 / 1053

Field Service Ver. 2.0 Jul. 2009

20. NETWORK ERROR CODE

851

TROUBLESHOOTING

SMB browsing

12267

• The device certificate does not exist.

12268

• No certificate is sent from the server.

User
authentication

• Invalid parameter (e.g. the number of characters exceeds the limit,

blank).

• The authentication function setting is disabled.

• Failed to resolve the name using the DNS server.

• Unable to find the authentication server.

• Failed to authenticate.

• Failed to allocate memory.
• An unexpected error occurred (which does not occur under normal

usage conditions).

• An authentication request is received while an internal task of the user

authentication client is being performed.

• The connection was interrupted while the user authentication was being

performed.

10000

• Failed in authentication using a PKI card.

12236

• The certificate has expired, or the validity period has not yet started.

12239

• The certificate does not have the expected usage.

12240

• The certificate is not trusted. To trust the certificate, the certificate must

be registered to the system.

12241

• The certificate has expired.

12242

• The CA server rejected the connection.

12243

• The connection to the server that checks for expiration of the certificate

has timed out.

12244

• Unable to check for expiration because the CRL size exceeds the maxi-

mum capacity that can be retained (1 MB).

12261

• The format of the certificate is invalid.

12263

• Although the environment is configured to use the HDD, it is unable to

perform verification because the HDD path has not been specified.

12264

• Unable to perform verification because there are too many certificates to

be verified (the maximum number of certificates that can be verified at a
time is 20).

12266

• Internal error of the certificate verification.

WebDAV client

• The ID of the client that is not opened is specified.

• The reception has timed out.

• A reception error occurred.
• An invalid request URL is specified.

• Content-Length or the received data size exceeds the maximum transfer-

able size.

• The size of the message body is too large.

• The process is cancelled by a device reset.
• The size of the message body exceeds the maximum transferable size.

• An internal error occurred.
• The process is cancelled by an internal reset.

• Failed to connect to the WebDAV server.

• An error occurred while sending data to the WebDAV server.

Function

Code

Description

Y110571-1 Service Manual

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 911 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: