Olivetti d-color MF651 Скачать руководство пользователя страница 909

Страница: 909 / 1053

Field Service Ver. 2.0 Jul. 2009

20. NETWORK ERROR CODE

849

TROUBLESHOOTING

WebDAV
transmission

407

• Proxy authentication error.

1001

• The server does not support WebDAV.
• Unable to upload data to the server.

1002

• The intermediate resource is not a collection (directory) (e.g. the speci-

fied folder does not exist).

1003

• The target resource is a collection (directory).

1011

• Although “https” is specified for the resource URL, it is unavailable

because the SSL library is not included for the modularity.

1012

• Although “https” is specified for the resource URL, the connection is

interrupted because the WebDAV server certificate has expired.

1013

• The CONNECT method is issued to the proxy server to establish an SSL

connection via a proxy, but it is rejected.

1017

• A communication error occurred while sending a request.

1018

• A communication error occurred while receiving a response.

1027

• nContentLength exceeds the maximum transferable size.

1030

• Although use of a proxy has been specified, the proxy setting information

is unavailable.

1031

• The connection to the proxy server failed (including connection time out).

1098

• Failed in chunk TX to SharePoint Server.

1099

• Other internal error occurred (e.g. memory shortage).

2236

• The certificate has expired, or the validity period has not yet started.

2238

• The CN field of the certificate does not match the server address.

2239

• The certificate does not have the expected usage.

2240

• The certificate is not trusted.
• To trust the certificate, the certificate must be registered to the system.

2241

• The certificate has expired.

2242

• The CA server rejected the connection.

2243

• The connection to the server that checks for expiration of the certificate

has timed out.

2244

• Unable to check for expiration because the CRL size exceeds the maxi-

mum capacity that can be retained (1MB).

2261

• The format of the certificate is invalid.

2263

• Failed to initialize the certificate verification.

2264

• Unable to perform verification because there are too many certificates to

be verified (the maximum number of certificates that can be verified at a
time is 20).

2266

• Internal error of the certificate verification.

2267

• The device certificate does not exist.

2268

• No certificate is sent from the server.

Function

Code

Description

Y110571-1 Service Manual

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 909 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: