Olivetti d-color MF651 Скачать руководство пользователя страница 908

Страница: 908 / 1053

20. NETWORK ERROR CODE

Field Service Ver. 2.0 Jul. 2009

848

TROUBLESHOOTING

SMTP
transmission

2268

• No certificate is sent from the server.

3000

• An unexpected error occurred.

3001

• An unexpected error occurred within the library being used.

3002

• An invalid channel is specified.

3003

• SMTP server address is invalid.

3004

• Parameter error (MIMEBodyHeader).

3005

• Parameter error (DisplayName).

3006

• Parameter error (character set).

3007

• Parameter error (From address).

3008

• Parameter error (To address).

3009

• Parameter error (CC address).

3010

• Parameter error (BCC address).

3011

• Parameter error (pEmailSet is NULL).

3012

• Parameter error (destination certificate is NULL).

3013

• Parameter error (E-mail body).

3014

• The HDD is disabled.

3015

• The S/MIME function is disabled.

3016

• The device certificate cannot be used in S/MIME (e.g. self-signed certifi-

cate error, the private key type is not RSA).

3018

• An invalid encryption algorithm is specified.

3019

• An invalid signature algorithm is specified.

3020

• The E-mail address included in the destination certificate does not match

the destination address (To/Cc/Bcc).

3021

• The E-mail address included in the certificate does not match the sender

(From) address.

3022

• Format error of the certificate.

3023

• Parameter error (Disposition-Notification-To).

3024

• Message syntax error of the receiver side.

3025

• The SMTP server does not support the STARTTLS command.

WebDAV
transmission

• The format of the URL of the target resource is invalid.
• Parameter error.

• Attempted to send data that exceeds the maximum transferrable size for

transfer coding.

• The specified protocol is unavailable.

• The process is cancelled by a device reset.

• A buffer shortage occurred.

• The connection has already been established.

• The connection to the WebDAV server failed (including connection time

out).

• The device is not connected to the network.

• The network connection is busy.

• The connection has been interrupted with the condition that is insufficient

to the specified size.

401

• Authentication error.

Function

Code

Description

Service Manual Y110571-1

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 908 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: