manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 9 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 9

SAFETY AND IMPORTANT WARNING ITEMS

S-7

Ventilation

CAUTION

• The product generates ozone gas during operation, but it 

will not be harmful to the human body.

If a bad smell of ozone is present in the following cases, 
ventilate the room.

a. When the product is used in a poorly ventilated room
b. When taking a lot of copies
c. When using multiple products at the same time

Stability

CAUTION

• Be sure to lock the caster stoppers.

In the case of an earthquake and so on, the product may 
slide, leading to a injury.

Inspection before Servicing

CAUTION

• Before conducting an inspection, read all relevant docu-

mentation (service manual, technical notices, etc.) and 

proceed with the inspection following the prescribed pro-

cedure in safety clothes, using only the prescribed tools. 

Do not make any adjustment not described in the docu-

mentation.

If the prescribed procedure or tool is not used, the prod-
uct may break and a risk of injury or fire exists.

• Before conducting an inspection, be sure to disconnect 

the power plugs from the product and options.

When the power plug is inserted in the wall outlet, some 
units are still powered even if the POWER switch is 
turned OFF. A risk of electric shock exists.

• The area around the fixing unit is hot.

You may get burnt.

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов