manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 674 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 674

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

614

ADJUSTMENT

 / SETTING

12.16.22 Fold power of pages restrict

A. Use

• Imposes restriction on the number of sheets to be folded in each of different folding 

modes.

• This function is available only when SD-508 or ZU-606 is installed.
• To change the maximum number of sheets to be folded in each of different folding 

modes.

B. Procedure

[Center Fold]
• Default setting: “3 Piece”.
• Setting range: 1 to 3 Piece

[Center Staple]
• Default setting: “20 Piece”.
• Setting range: 2 to 20 Piece

[three fold]
• Default setting: “1 Piece”.
• Setting range: 1 to 3 Piece.

[z fold/staple using together]
• Default setting: “10 Piece”.
• Setting range: 2 to 10 Piece.

[z fold]
• Default setting: “50 Piece”.
• Setting range: 50 pieces, 40 pieces, 30 pieces, 20 pieces.

1.

Call the Service Mode to the screen.

2.

Touch [Finisher] 

o

 [Fold power of pages restrict].

3.

Select a folding mode where the maximum is restricted and enter a desirable maximum
number with the 10-key pad.

4.

Touch [END].

5.

Touch [Exit] on the Service Mode screen.

6.

Turn OFF the main power switch. then, wait for 10 sec. or more and turn ON the main 
power switch.

12.16.23 Job Separator

A. Use

• Use this adjustment to check job separator operation.

B. Procedure

1.

Call the Service Mode to the screen.

2.

Touch [Finisher] 

o

 [Job Separator].

3.

Touch [Exit Motor Drive], [Route Change Motor Drive], [Shift Motor Drive] or [Exit Roller 
Retraction].

4.

Touch the Start key to start the operation check.

5.

Touch the Stop key to stop the ongoing operation check.

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов