manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 653 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 653

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

593

ADJUSTMENT

 / SETTING

12.14.7

Read Pos Adj

A. Use

• To adjust the original read position.
• When the first/second carriage, the scanner wire, the scanner assy, the original glass 

moving unit, and/or the glass step sheet have been replaced.

B. Procedure
(1) Auto Adjust

1.

Call the Service Mode to the screen.

2.

Touch [ADF] 

o

 [Read Pos Adj].

3.

Touch [Auto Adjust].

4.

Open the ADF.

5.

Place the ADF reading chart [1] so 
that a triangular mark may become 
the original glass side (downward)
and the pointed tip of the triangle 
points toward the black sheet on the 
left side.

6.

Press the Start key.

NOTE
• Be sure that the ADF reading chart 

is in position.

• Keep the automatic document 

feeder open while making the 
adjustment.

7.

Make sure that the result is OK.

8.

Touch [END].

9.

Touch [Exit] on the Service Mode screen.

10.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

NOTE
If the result is Unable:
• Check that the chart is in the correct place.
• Make the manual adjustment on the [Read Pos Adj] screen.

See P.593

[1]

A01HF3C003DA

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов