manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 652 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 652

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

592

ADJUSTMENT

 / SETTING

12.14.6

Original Tray Width

A. Use

• To set the values of maximum (A3 position) and minimum (B6 position) widths on the 

document width detection variable resistor.

• When an original misfeed occurs.
• When an original size detection error occurs.
• When the document width detection variable resistor has been replaced.
• When the EEPROM has been replaced.

B. Procedure

1.

Call the Service Mode to the screen.

2.

Touch [ADF] 

o

 [Original Tray Width].

3.

Widen the width across the edge 
guides [1] by sliding them to the “A3” 
position.

4.

Touch [Max. Width].

5.

Press the Start key.

6.

OK is displayed when the adjustment has been completed.

7.

Narrow the width across the edge 
guides [1] by sliding them to the “B6” 
position.

8.

Touch [Min. Width].

9.

Press the Start key.

10.

OK is displayed when the adjustment has been completed.

11.

Touch [END].

12.

Touch [Exit] on the Service Mode screen.

13.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

NOTE
If the result is NG:
• Possible causes includes failure of the document width detection variable resistor, 

wrong wiring to the volume and failure of the DFCB.

A0HTF2C037DA

[1]

A0HTF2C038DA

[1]

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов