manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 649 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 649

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

589

ADJUSTMENT

 / SETTING

12.14.4

Paper Passage

A. Use

• To check for paper passage through the ADF in each of the ADF modes.
• Used for checking the document path for any abnormal condition when a document mis-

feed occurs.

B. Procedure

1.

Call the Service Mode to the screen.

2.

Touch [ADF] 

o

 [Paper Passage].

3.

Select a paper passage mode to be tested from [1-Sided No Detect], [1-Sided Mixed 
Org.], [2-Sided], or [AMS Mixed Org.].

4.

Set the original in the feed tray.

5.

The Start key changes from orange to blue.

6.

Press the Start key. The operation starts.

NOTE
• After starting the operation by pressing the Start key, if the Start key is pressed 

during the operation, the operation will be suspended. Then, if the Start key is 
pressed again during the suspension, the operation will be resumed.

• If the Stop key is pressed during the test operation, the test will be forced to end.
• If there is no Original set in the feed Tray, the Start key will not work.
• All Originals set in the feed Tray are passed through. Upon the completion of all 

Originals passed through, the Paper Through Test ends.

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов