Olivetti d-color MF651 Скачать руководство пользователя страница 648

Страница: 648 / 1053

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

588

ADJUSTMENT

/ SETTING

(3) Main Scanning (Front)

Call the Service Mode to the screen.

Touch [ADF]

[Auto Stop Position Adjustment].

Touch [Main Scanning (Front)].

Place the chart in the document feed tray (with the side having an arrow facing up).

Press the Start key.

Make sure that result is OK. Then, touch [SET].

Touch [END].

Touch [Exit] on the Service Mode screen.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

NOTE
If the result is Unable:
• Check and correct the skew of the document.
• Manually correct the value of [Original Stop Position].

See P.585

(4) Main Scanning (Back)

Call the Service Mode to the screen.

Touch [ADF]

[Auto Stop Position Adjustment].

Touch [Main Scanning (Back)].

Place the chart in the document feed tray (Set the chart with its blank side facing
upward.).

Press the Start key.

Make sure that result is OK. Then, touch [SET].

Touch [END].

Touch [Exit] on the Service Mode screen.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

NOTE
If the result is Unable:
• Check and correct the skew of the document.
• Manually correct the value of [Original Stop Position].

See P.585

Service Manual Y110571-1

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 648 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: