Olivetti d-color MF651 Скачать руководство пользователя страница 602 | Manualshive

Страница: 602 / 1053

Olivetti d-color MF651 Скачать руководство пользователя страница 602

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

542

ADJUSTMENT

/ SETTING

12.9.20

Coverage Rate Screen

A. Use

• To set whether or not to display a coverage rate on the sales counter screen and sales

counter list.

B. Procedure

• The default setting is Display.

“Display”

Do Not Display

12.9.21

JAM Code Display Setting

A. Use

• To set whether or not to add a jam code to a jam warning display on the control panel

when a jam occurs.

B. Procedure

• The default setting is Do Not Display.

Display

“Do Not Display”

12.9.22

BootUp Screen

A. Use

• To customize the BootUp Screen displayed upon machine start-up.
• Use this feature when changing the

Olivetti

logo displayed on the control panel

upon start-up to a client company logo or others for client’s intended use of the machine.

• Register logo data in the machine’s flash ROM via a USB memory device.

The following are the logo data specifications that should be met.

Image format

: PNG format

File extension

: *. png

File name

: BootupScreen.png

Image size

: 800 x 480 dots

Color

: 256 colors (Palette that the machine specifies is used.)

NOTE
• When making the logo data, use the exclusive image making tool.
• If a USB memory device is not connected or a nonconforming USB memory device

is connected, “USB NG” is displayed and logo data cannot be registered.

• If the file name of logo data does not conform to the above specifications, “File

NG” message is displayed and logo data cannot be registered.

Service Manual Y110571-1

«
...
600
601
602
603
604
...
»

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов