Olivetti d-color MF651, Руководство по обслуживанию, Страница: 600 / 1053

12. SERVICE MODE Field Service Ver. 2.0 Jul. 2009
540
ADJUSTMENT
/ SETTING
12.9.17 Network Fax Settings
A. Use
• To set whether or not to use network fax function.
• To use network fax function (IP address fax, internet fax).
• Selection will be available when each network fax function is set to “ON” in the following
settings.
[Administrator Settings]
o
[Network Settings]
o
[Network Fax Settings]
o
[Network Fax
Function Settings]
B. Procedure
• The default settings are OFF.
IP Address Fax : ON “OFF”
SIP-Fax : Not Used
Internet Fax : ON “OFF”
12.9.18 Image Stabilization Setting
A. Use
• To change the type and timing of image stabilization.
• To provide the desirable image stabilization control that depends on customer’s machine
usage pattern, i.e. the ratio of color to black print.
Standard : This mode is suitable for low-volume users and reduces the number of
times image stabilization is carried out when the main power switch is
turned ON.
If the change of absolute humidity is detected during warm-up, normal
stabilization is performed during warm-up.
Color Priority : This mode is suitable for high-volume and high ratio of color print users.
Color stabilization sequence is performed unconditionally when the
main power switch and the sub power switch are turned ON.
Mono Priority : This mode is suitable for users who use mainly black print and use less
color print. It provides monochrome stabilization and reduces the num-
ber of times image stabilization is carried out when the main power
switch is turned ON. If the change of absolute humidity is detected dur-
ing warm-up, monochrome stabilization is performed during the warm-
up and color stabilization is performed before color printing.
B. Procedure
• The default settings are Standard.
“Standard” Color Priority Mono Priority
Service Manual Y110571-1