manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 599 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 599

Field Service Ver. 2.0 Jul. 2009

12. SERVICE MODE

539

ADJUSTMENT

 / SETTING

12.9.14

Split Line Detect. Setting-Warning Level

A. Use

• To set how to display the warning when stain on the ADF original glass is detected.
• Use when changing the display of the warning which requests the cleaning of the stain 

on the glass detected by the pre-detection of the lines.

0: Warning will not be displayed.
1: Warning will be displayed by the maintenance mark. (warning code: D-1/D-2)
2: Warning will be displayed on the message area on the basic screen.
3: Warning will be displayed on all screens.

NOTE
• This setting is invalid when [Prior Detection] is set to “Not Set.”

B. Procedure

• The default setting is 2.

0

1

“2”

3

12.9.15

Split Line Detect. Setting-Paper Passaging Detection

A. Use

• To set the operation for detection and removing operation of stain on the ADF original 

glass when feeding the original.

• Use when changing the operation for detection and removing operation of stain on the 

ADF original glass when feeding the original.

0

: The glass will stop moving when the original is fed, and will not perform 

removing the stain.

1

: The glass will move between originals when feeding the original.

B. Procedure

• The default setting is 1

0

“1”

12.9.16

Stamp

A. Use

• To set the mounting status of the optional stamp unit SP-501.
• To use when setting up the stamp unit SP-501.

B. Procedure

• The default setting is Unset.

Set

“Unset”

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов