Olivetti d-color MF651, Руководство по обслуживанию, Страница: 593 / 1053

Field Service Ver. 2.0 Jul. 2009 12. SERVICE MODE
533
ADJUSTMENT
/ SETTING
12.9.5 Unit Change
A. Use
• To select who is to replace a unit.
• Upon setup.
• When the unit life arrives, the warning display is intended for the specific person who is
going to replace the unit.
When “User” is selected : Printing is inhibited.
When “Service” is selected : Life warning.
• To set whether or not to display a toner near empty warning.
• Drum unit/K and Developing unit/K are not subject to this setting because they are
replaced by customer engineer.
B. Procedure
<Unit Change>
• The following are the default settings:
<Warning Display>
Toner Near Empty : “Yes” No
12.9.6 Software Switch Setting
A. Use
• To set the operating characteristic of each function from software switch depending on
what types of printing are normally made.
B. Procedure
1. Touch [Software Switch Setting].
2. Touch [Switch No.] and enter the intended switch number with the ten-key pad.
3. Touch [Bit Assignment].
4. Use [
m
] or [
o
] to select a bit. To set the bit, enter 0 or 1 with the ten-key pad.
5. To set the bit in hex, touch [HEX Assignment] and use the ten-key pad and [A] to [F]
keys to enter numbers and characters.
6. Touch [Fix].
US, Japan, Others 4 Europe, Others1/2/3
Toner Cartridge “User” Service User Service
Imaging Unit User “Service” “User” Service
Waste Toner Box User “Service” “User” Service
Punch Dust Box User “Service” “User” Service
Y110571-1 Service Manual