manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 550 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 550

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

490

ADJUSTMENT

 / SETTING

12.6.14

Monochrome Density Adjustment

A. Use

• To fine-adjust the density of the printed image for a black print.
• To vary the density of the printed image of a black print.

B. Procedure

• The default setting is 0.

-2 to +2 (step: 1)

1.

Call the Service Mode to the screen.

2.

Touch these keys in this order: [Imaging Process Adjustment]

o

 [Monochrome Density 

Adjustment].

3.

Touch [Lighter] or [Darker] as necessary to correct the image density.
If the black is light, touch the Darker key.
If the black is dark, touch the Lighter key.

12.6.15

Development AC Voltage Choice

A. Use

• To change the setting of the development AC voltage.
• When this function is turned ON, it decreases the development AC voltage, thereby pre-

venting voltage leak from occurring.

• Use when patches of white occur in the image in an ambience of low atmospheric pres-

sure, such as in high altitudes.

• If ON is set, the screen doesn't display [Service Mode] 

o

 [Imaging Process Adjustment] 

o

 [Gradation Adjust] and the Gradation Adjust is not allowed.

B. Procedure

• The default setting is OFF.

ON

“OFF”

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов