manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 544 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 544

12. SERVICE MODE

Field Service Ver. 2.0 Jul. 2009

484

ADJUSTMENT

 / SETTING

12.6.3

Transfer Belt-Auto Cleaning

A. Use

• To set whether to perform the long regular transfer belt cleaning operation (approx. 30 

sec).

• The long cleaning operation (approx. 30 seconds) can be used to take more effective

measures against toner filming on the surface of the transfer belt.

Enable : Performs the long cleaning operation (approx. 30 sec) after the normal regular 

cleaning operations (approx. 10 sec.) which are performed nine times.

Disable : Performs only the normal regular operations (approx. 10 sec) but not the long 

cleaning operation (approx. 30 sec.).

B. Procedure

• The default setting is Disable.

Enable

“Disable”

12.6.4

D Max Density

A. Use

• To adjust gradation, color, and image density to target reproduction levels by varying the 

maximum amount of toner sticking to paper through auxiliary manual fine-adjustment of 
gamma of each color after gradation adjust.

• An image quality problem is not corrected even after gradation adjust has been run.

B. Procedure

• The default setting is 0.

-10 to +10 (step: 1 *)

*: 1 step corresponds to 0.03 in density difference.

1.

Call the Service Mode to the screen.

2.

Touch these keys in this order: [Imaging Process Adjustment]

o

 [D Max Density].

3.

Select [COPY] or [Printer].

4.

Select the color to be adjusted.

5.

Enter the new setting from the 10-key pad or [+/-].
To increase the maximum amount of toner sticking, increase the setting value.
To decrease the maximum amount of toner sticking, decrease the setting value.

6.

Touch [END] to return to the [Process] menu screen.

7.

Touch [Stabilizer].

8.

Touch [Stabilizer Mode].

9.

Press the Start key to validate the adjustment value.

10.

Check the print image for any image problem.

NOTE
• If the setting value has been changed, be sure to run an image stabilization 

sequence to make valid the new value.

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов