manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 509 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 509

Field Service Ver. 2.0 Jul. 2009

10. UTILITY

449

ADJUSTMENT

 / SETTING

10.6.96

OpenAPI Authentication Management-Restriction Code Setting

• It will be displayed in 

d-Color

 

MF

65

1

/

MF

55

1

 machines where the function version is 

version 

2 or later and in all 

d-Color

 

MF

45

1

 machines.

A. Use

• These are communication settings for the application which is developed by the third 

vendor. 
Do not set or change these settings without vendor’s instructions.

10.7 Banner Printing

• It will not be displayed when the optional finisher FS-526 is mounted.
• It will not be displayed when the following setting shows that vendor is mounted. 

[Service Mode] 

o

 [Billing Setting] 

o

 [Management Function Choice]

A. Use

• To shift to the banner printing mode.
• To use when printing on the long size paper.

B. Procedure

1.

Set the long size paper to the bypass tray.

2.

Touch [Banner Printing], and touch [ON].

3.

Send the job for the long paper print.

4.

Touch [Finish] to finish banner printing mode.

NOTE
• Only PC print is available for the long paper print.
• Normal job cannot be accepted during banner printing mode.

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов