Olivetti d-color MF651 Скачать руководство пользователя страница 506

Страница: 506 / 1053

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

446

ADJUSTMENT

/ SETTING

D. Authentication Time Setting

• It will be displayed only when the following setting shows that authentication device 1 is

mounted.
[Service Mode]

[Billing Setting]

[Management Function Choice]

(1) Use

• To set the authentication mode when authentication device is used.
• To change the authentication mode when authentication device is used.

Keep Card

: Authentication is available leaving the card in the given place when

making authentication with the device.

Touch and Print : Card is placed only when authentication is made with the device and

if the card is left for a given time (authentication reset time) the
authentication setting is reset.

• When selecting “Touch and Print”, authentication reset is set after completing the job in

[Authentication Time].

(2) Procedure

<Authentication Method>
• The default setting is Touch and Print.

Keep Card

“Touch and Print”

<Authentication Time>
• The default setting is 1 min.

1 to 30 min.

<Authentication Log-out When Job is Completed>
• The default setting is Yes.

“Yes”

10.6.90

Security Settings-Stamp Settings

A. Apply Stamps
(1) Use

• Selects whether to add a stamp to documents when jobs are printed or fax/scanned data

is sent.

(2) Procedure

• The each default setting is Do Not Apply.

Apply

“Do Not Apply”

• Touch “Apply” to make stamp settings independently for print and transmission modes.

B. Delete Registered Stamp
(1) Use

• Deletes registered stamps, and copy protect/repeat stamps.

(2) Procedure

Touch [Delete Registered Stamp].

Select [Stamp] or [Copy Protect/Stamp Repeat].

Select [Yes] on the confirmation screen and touch [OK] to delete the registered stamps.

Service Manual Y110571-1

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 506 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: