manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 426 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 426

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

366

ADJUSTMENT

 / SETTING

10.6.35

User Authentication/Account Track-Scan to Authorized Folder Settings

A. Use

• Use to restrict specification of sending destinations by users.
• Enabling this item disables manual entry of destinations except for recipients of faxes or 

IP address faxes. Therefore users can specify sending destinations only by accessing 
the address book. Enabling this item also applies the following restrictions.

- Users cannot save documents to User Boxes
- Users cannot transmit documents from User Boxes
- Users cannot use annotation User Boxes
- Users cannot use the image panel
- Users cannot select addresses from the transmission history
- Users cannot use the URL notification function

B. Procedure

• The default setting is Do Not Limit.

Limit

“Do Not Limit”

10.6.36

Network Settings-TCP/IP Settings

A. TCP/IP Settings
(1) Use

• To set whether to enable or disable TCP/IP settings.

(2) Procedure

• The default setting is ON.

“ON”

OFF

NOTE
• When the setting is changed, turn off the main power switch and turn it on again 

more than 10 seconds after.

B. IPv4 Settings
(1) Use

• To set whether to enter the IP address (IPv4) directly or to obtain it automatically.

(2) Procedure

• The default setting is Auto Input.

Manual Input

“Auto Input”

• When it is set to [Auto Input], select the method to obtain it automatically.

DHCP Setting

: ON

OFF

BOOTP Setting

: ON

OFF

ARP/PING Setting : ON

OFF

AUTO IP Setting

: ON

OFF

NOTE
• [ARP/PING Setting] and [Auto IP Setting] cannot be set to “OFF” simultaneously.
• They will all be set to “ON” when [Manual Input] is changed to [Auto Input].

• When it is set to [Manual Input], set the IP address, subnet mask and default gate way.

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов