manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 411 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 411

Field Service Ver. 2.0 Jul. 2009

10. UTILITY

351

ADJUSTMENT

 / SETTING

10.6.12

System Settings-Stamp Settings

A. Header/Footer Settings
(1) Use

• Saves or deletes header/footer settings.
• Able to obtain registered header/footer data by [Application] 

o

 [Stamp/Composition]

(2) Procedure

• Touch [New] to register new headers and footers.

B. Fax TX Settings
(1) Use

• Specifies whether to reset a stamp setting when fax is sent.

(2) Procedure

• The default setting is Cancel.

“Cancel”

Do Not Cancel

10.6.13

System Settings-Blank Page Print Settings

A. Use

• Specifies whether to print a stamp/page number on blank pages.

B. Procedure

• The default setting is Print.

“Print”

Do Not Print

10.6.14

System Settings-Application Key Settings

• This is displayed only when the optional i-Option (LK-101 or LK-103) is activated.

A. Use

• To assign the additional functions provided by i-Option to the application keys.
• This settings allow free application key assignment to additional functions provided by i-

Option as well as to “User Box”, “Fax/Scan” and “Copy” to which the application keys 
were conventionally assigned. (However, Key 0 is assigned to the function of displaying 
the application menu so that other functions cannot be assigned to Key 0.)

• The functions that can be assigned are as follows:

Copy, Fax/Scan, User Box, Image Panel, Web Browser, My Panel

B. Procedure

1.

Select [Key 1] or [Key 2].

2.

Select a function to which the key is assigned, and touch [OK].

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов