manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 400 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 400

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

340

ADJUSTMENT

 / SETTING

(2) Original Stop Position
<Use>

• To manually adjust the original stop position and the read position in each of the ADF 

modes.

• When the result is Unable in the [Auto Adj. of Stop Position].

<Procedure>

1.

Place the chart in the document feed tray (with the side having an arrow facing up).

2.

Make a full size copy of the chart.

NOTE
• In the same way place the chart with the blank side facing up in the document feed 

tray in the duplex mode and make a copy. Check the difference in the widths of a 
between the chart and the second sided surface of the copy sample.

3.

Check that the difference in the widths of B between the chart and the copy sample falls 
within the specified range.

Specification B: 0 ± 2.0 mm
Adjustment range: -4.0 mm to +4.0 mm (1 step: 0.1 mm)

4.

Call the Administrator Settings to the screen.

5.

Touch [System Settings] 

o

 [Expert Adjustment]

o

 [ADF Adjustment] 

o

 [Original Stop 

Position].

6.

Look at the copy and adjust [Front] or [Back] with the [+]/[-] key.
If the difference in the widths of B is greater than the specifications, enter the [+] value.
If the difference in the widths of B is smaller than the specifications, enter the [-] value.

7.

Touch [OK].

8.

Make a copy of the chart again and check that the difference in the widths of B falls 
within the specified range.

B

A0P0F3C601DA

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов