Olivetti d-color MF651, Руководство по обслуживанию, Страница: 389 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
329
ADJUSTMENT
/ SETTING
E. Image Stabilization
(1) Image Stabilization Only
<Use>
• The image stabilization sequence is carried out without clearing the historical data of
image stabilization control.
• Use if an image problem persists even after [Gradation Adjustment] has been executed.
• When [D Max Density] and [Background Voltage Margin] of Service Mode are changed.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Image Stabilization]
o
[Image Sta-
bilization Only].
3. Press the Start key to start Stabilizer.
The Start key turns red and stays lit up red during the Stabilizer sequence.
4. Stabilizer is completed when the Start key turns blue.
(2) IniImage Stabilization
<Use>
• To carry out an image stabilization sequence after the historical data of image stabiliza-
tion control has been initialized.
• Use if an image problem persists even after [Gradation Adjustment] has been executed.
• Use if tone reproduction and maximum density are faulty even after image stabilization
has been executed.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Image Stabilization]
o
[IniImage Stabilization].
3. Press the Start key to start Stabilizer.
The Start key turns red and stays lit up red during the Stabilizer sequence.
4. Stabilizer is completed when the Start key turns blue.
Y110571-1 Service Manual