Olivetti d-color MF651, Руководство по обслуживанию, Страница: 386 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
326
ADJUSTMENT
/ SETTING
(10) 1st Z-Fold Position Adjustment
2nd Z-Fold Position Adjustment
<Use>
• To adjust the positions of the 1st Z-fold and 2nd Z-fold for the Z-fold mode.
• Make the adjustment upon setup of ZU-606.
<Procedure>
1. Make copies in the Z-fold mode.
2. Make an adjustment so that the width a is within the following range.
Setting range: -12.8 mm to +12.7 mm (Step = 0.1 mm)
NOTE
• Length of the 1st fold is for standard value.
• The adjustable range for B4 size is only between -2.0 mm and +2.0 mm.
• 8.5 X 14 is available for only an half fold.
3. Call the Administrator Settings to the screen.
4. Touch [System Settings] o [Expert Adjustment] o [Finisher Adjustment] o [1st Z-Fold
Position Adjustment] or [2nd Z-Fold Position Adjustment].
5. Select [ALL] and make the setting using [+] or [-].
To increase the length of the 1st fold (2nd fold), enter a negative value with [-] key.
To decrease the length of the 1st fold (2nd fold), enter a positive value with [+] key.
NOTE
• The adjustment setting value used for each paper size is the value set with [ALL]
plus the value set for each paper size.
6. Touch [OK].
7. Make copies in the Z-fold mode and check for possible deviation from the specified 1st
and 2nd Z-fold positions.
a
L
A109F3C500DA
Position of the first fold
Length of the first fold
Length of the second fold
Position of the second fold
Length of 1st fold Length a Length L
11 x 17 108 mm 4.0 ± 2.0 mm Less than 215 mm
A3 105 mm 4.0 ± 2.0 mm Less than 209 mm
B4 91 mm 4.0 ± 2.0 mm Less than 181 mm
8.5 x 14 - - Less than 241.7 mm
8K 98 mm 4.0 ± 2.0 mm Less than 194 mm
Service Manual Y110571-1