Olivetti d-color MF651, Руководство по обслуживанию, Страница: 383 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
323
ADJUSTMENT
/ SETTING
(6) Punch Regist Loop Size Adjustment
<Use>
• Adjusts the punch loop size used for paper exited from the main body.
• To address problems such as misaligned punch holes, wrinkled paper, and jam at the
punch registration section.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Finisher Adjustment]
o
[Punch
Regist Loop Size Adjustment].
3. Touch the paper size where punch regist loop size is adjusted.
4. Set the correction value using the [+]/[-] keys.
Misaligned punched holes: Enter the value of [+]
Wrinkled paper: Enter the value of [-]
5. Touch [OK].
(7) Punch Edge Sensor Adjustment
<Use>
• Adjusts the sensitivity (light intensity) of the PK punch front sensor of the punch kit.
• This adjustment is made at the time of setup.
<Procedure>
1. Call the Administrator Settings to the screen.
2. Touch [System Settings]
o
[Expert Adjustment]
o
[Finisher Adjustment]
o
[Punch
Edge Sensor Adjustment].
3. Touch Start key.
4. Confirm that the result is OK.
NOTE
• When NG appears, check whether the punch kit is properly installed.
5. Touch [OK].
Y110571-1 Service Manual