manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 374 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 374

10. UTILITY

Field Service Ver. 2.0 Jul. 2009

314

ADJUSTMENT

 / SETTING

(4) Centering (Duplex 2nd Side)

• It will not be displayed when the following setting shows that Management Device 1 is 

mounted during the device power is OFF or no authentication is set.
[Service Mode] 

o

 [Billing Setting] 

o

 [Management Function Choice]

• This menu is unavailable when the key counter is not inserted while only the key counter

is set to Set by [Service Mode] 

o

 [Billing Setting] 

o

 [Management Function Choice]. 

<Use>

• To vary the print start position in the main scan direction for each paper source in the 2-

sided mode.

• To use when the optional automatic duplex unit AD-503 is set up.
• The image on the backside of the 2-sided copy deviates in the main scan direction.

<Procedure>

• Width A on the test print produced should fall within the following range.
• For measurement, use the image produced on the backside of the test print.

Specifications: 3.0 

r

 0.5 mm

Setting range: -3.0 mm to +3.0 mm (in 0.2 mm increments)

1.

Call the Administrator Settings to the screen.

2.

Touch [System Settings] 

o

 [Expert Adjustment]

o

 [Printer Adjustment] 

o

 [Centering 

(Duplex 2nd Side)].

3.

Select the paper source to be adjusted.

4.

Press the Start key to let the machine produce a test print.

5.

Check the dimension of width A on the test print.

6.

If width A falls outside the specified range, change the setting using the [+] / [-] key.
If width A is longer than the specifications, make the setting value smaller than the cur-
rent one.
If width A is shorter than the specifications, make the setting value greater than the cur-
rent one.

7.

Press the Start key to let the machine produce a test print.

8.

Check the dimension of width A on the test print on the backside of the copy.

9.

If width A is outside the specified range, change the setting again and make a check 
again.

10.

If width A falls within the specified range, touch [OK].

11.

Following the same procedure, adjust for all other paper sources. 
(Use A4 or 8 

1

/

2

 × 11 plain paper for the manual bypass tray.)

A0P0F3C504DA

Width A

Backside

Service Manual                                           Y110571-1

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов