manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 361 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 361

Field Service Ver. 2.0 Jul. 2009

10. UTILITY

301

ADJUSTMENT

 / SETTING

10.5.53

Change Password

• When conducting user authentication (MFP only), it will be displayed only when the 

authentication is complete.

• This menu is available only when box administrator authentication is established during 

user authentication or account track.

A. Use

• To modify the password used for the user authentication.

B. Procedure

• Enter the user authentication password with the keys on the control panel.

Current Password : Enter the user authentication password currently used.
New Password

: Enter the new user authentication password to be used.

Retype Password : Enter the new user authentication password again.

NOTE
• When [Password Rules] which can be displayed by the following setting is set to 

“ON”, password using the single letter or the password same with the previous 
one, less than 8-digit will not be modified. 
[Utility] 

o

 [Administrator Settings] 

o

 [Security Setting]

• When the following setting is set to “ON”, entering the incorrect password three 

times will cause access lock. When an access lock occurred, turn the main power 
switch OFF, and wait for 10 seconds or more and turn main power switch ON again 
to enter the password again. 
[Administrator Settings] 

o

 [Security Setting] 

o

 [Enhanced Security Mode]

10.5.54

Change E-mail Address

• When conducting user authentication (MFP only), it will be displayed only when the 

authentication is complete.

• It will be displayed only when the following setting is set to “Level 2.”

[Administrator Settings] 

o

 [Security Settings] 

o

 [Administrator Security Levels]

A. Use

• To modify the e-mail address which is registered as a user.

B. Procedure

• Enter the new e-mail address using the keys on the control panel.

10.5.55

Change Icon

• When conducting user authentication, it will be displayed only when the authentication is 

complete.

A. Use

• Change the icon specified as registered user information.

B. Procedure

• Select the icon and press [OK].

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов