Olivetti d-color MF651 Скачать руководство пользователя страница 250

Страница: 250 / 1053

5. OTHER MAINTENANCE ITEMS

Field Service Ver. 2.0 Jul. 2009

190

MAINTENANCE

5.5.95

Toner supply motor/Y (M9), toner supply motor/M (M10),
toner supply motor/C (M11), toner supply motor/K (M12)

Remove the upper front door.

See P.79

Remove the upper left cover.

See P.83

Remove the toner cartridges (C,M,Y,K).

See P.44

Open the lower front door and take out the all imaging units.

See P.33

NOTE
• After the imaging unit has been removed from the main body wrap it in the light

shielding cloth and store it in a dark place. DO NOT leave the imaging unit
exposed to light for a extended of time as it will become damaged.

Remove the front right cover.

See P.93

Remove three screws [1], and
remove the exit tray front cover [2].

Remove two screws [1], and remove
the connector cover [2].

A0P0F2C197DA

[1]

[2]

[1]

[2]

A00JF2C349DA

Service Manual Y110571-1

Содержание d-color MF651




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-color MF651

Отзывы:

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 250 / 1053

Результаты поиска

Содержание d-color MF651

Отзывы: