manualshive.com logo in svg

Olivetti d-color MF651, Руководство по обслуживанию, Страница: 221 / 1053

Поделиться
Скачать
Olivetti d-color MF651 Скачать руководство пользователя страница 221

Field Service Ver. 2.0 Jul. 2009

5. OTHER MAINTENANCE ITEMS

161

MAINTENANCE

B. Reinstall procedure

1.

Temporarily secure the scanner 
motor assy [1] with three screws [2].

2.

With the scanner drive gear set 
screw [1] located on the right-hand 
side as shown on the left, slide the 
scanner motor assy [2] to the left and 
check that it is returned to the origi-
nal position by the tension of the 
spring [3]. 
Perform this step three times.

3.

Turn the pulley and make sure that 
the belt does not ride up on the pul-
ley teeth.

4.

Tighten the three screws [4] to fix the 
scanner motor assy into position.

5.5.68

Original glass moving motor (M202)

1.

Remove the scanner rear cover.

See P.85

2.

Remove the scanner upper rear cover /1 and scanner upper rear cover /2.

See P.86

3.

Disconnect the connector [1].

A00JF3C538DA

[2]

[1]

[2]

[2]

A00JF3C526DA

[3]

[2]

[4]

[1]

[4]

[4]

A0P0F2C149DA

[1]

Y110571-1                                           Service Manual

Содержание d-color MF651






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов