Olivetti d-Color MF220 Скачать руководство пользователя страница 120

Страница: 120 / 315

[Application]

5-56

d-Color MF360/280/220 (Version 3)

5.4

[Watermark]

You can print a watermark (light text) at the center of the paper. Select fixed preset text to be printed such
as [Invalid Copy] and [Private].

Copying with a watermark enables explicit indication of the use of the copied paper. It also helps prevent
unauthorized copy from the copied paper.

The watermark is printed on all pages at an angle of 45 degrees. It is printed once per page.

In case other settings affect the watermark printing to cause partial loss, the Watermark function is can-
celed upon copying.

Press [Application]

[Stamp/Composition]

[Watermark].

Settings

[Watermark Type]

Select a watermark from the eight types available.
The watermark selected is printed over the original image.

[Text Color]

Select the watermark color from [Black], [Magenta] and [Cyan].
The watermark is printed in the selected color.

Содержание d-Color MF220




























































































































































































































































































































Результаты поиска

Содержание d-Color MF220

Отзывы:

Olivetti d-Color MF220, Копирование операций, Страница: 120 / 315

Результаты поиска

Содержание d-Color MF220

Отзывы: