Olivetti d-Color MF220, Копирование операций, Страница: 109 / 315

d-Color MF360/280/220 (Version 3) 5-45
5.4 [Application] 5
[Non-Image Area Erase]
This function enables copying with the
ADF
open while having an original that cannot be loaded in the
ADF
placed at a desired position on the Original Glass .
The original is automatically detected and the area outside the original text is erased.
Erase methods include [Bevel] and [Rectangular]. [Bevel] is used when the background of the original is thin
and [Rectangular] is used when it is dark.
You can place the original on any position without opening or closing the
ADF
so that you can make copies
promptly. In addition, toner consumption will be reduced as the area outside the original text is erased.
[Rectangular]
[Bevel]
0 If erasing is not performed as desired, set [Erase Operation] under [Erase Adjustment] in Administrator
Settings.
0 The size of the original automatically detected is 3/8 e 3/8 inch (10 e 10 mm) or larger.
If the detection fails, a blank sheet of paper is output.
0 You cannot make copies with the
ADF
closed.
0 The original image may be defected at its top or end.
%
Press [Application] ö [Erase] ö [Non-Image Area Erase].
d
Reference
To set Erase Operation:
Press the
Utility/Counter
key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Erase Adjustment].