Olivetti d-Color MF2001 Скачать руководство пользователя страница 204

Страница: 204 / 333

2KZ/2K0

1-4-58

(3) Scan to E-mail error codes

Code

Contents

Check procedures/corrective measures

1101

SMTP/POP3 server does not exist on

the network.

1. Check the SMTP/POP3 server name.

2. Confirm device's network parameters.

3. Confirm the parameters of the network to which the

device is connected are correct.

1102

failed.

1. Confirm user name and password.

2. Check the SMTP/POP3 server.

1104

The domain the destined address

belongs is prohibited by scanning

restriction.

1. Confirm device's SMTP parameters.

1105

SMTP protocol is not enabled.

1. Confirm device's SMTP protocols.

1106

Sender’s address is not specified.

1. Confirm device's SMTP protocols.

2101

Connection to the SMTP/POP3 server

has failed.

1. Check the SMTP/POP3 server name.

2. Confirm that the LAN cable is properly connected to

the device.

3. Check the SMTP/POP3 port number.

4. Confirm device's network parameters.

5. Confirm the network parameters the device is con-

nected.

6. Check the SMTP/POP3 server.

2102

Connection to the SMTP/POP3 server

has failed.

(Connection timeout)

1. Check the SMTP/POP3 server name.

2. Check the SMTP/POP3 port number.

3. Confirm device's network parameters.

4. Confirm the network parameters the device is con-

nected.

5. Check the SMTP/POP3 server.

2201

Connection to the SMTP/POP3 server

has failed.

1. Confirm device's network parameters.

2. Confirm the network parameters the device is con-

nected.

2202

Connection to the SMTP/POP3 server

has failed.

(Timeout)

1. Confirm device's network parameters.

2. Confirm the network parameters the device is con-

nected.

2204

The size of scanning exceeded its limit.

1. Confirm device's network parameters.

3101

SMTP/POP3 server responded with an

error.

1. Confirm device's network parameters.

2. Confirm the network parameters the device is con-

nected.

3. Check the SMTP/POP3 server.

3201

No SMTP authentication is found.

1. Check the SMTP server.

2. The device supports SMTP authentication services

including CRAM-MD5, DIGEST-MD5, PLAIN and

Service Manual Y113010-4

Содержание d-Color MF2001













































































































































































































































































































































Результаты поиска

Содержание d-Color MF2001

Отзывы:

Olivetti d-Color MF2001, Руководство по обслуживанию, Страница: 204 / 333

Результаты поиска

Содержание d-Color MF2001

Отзывы: