Olivetti d-Color MF 4003 страница 72 Скачать руководство пользователя | Manualshive

Страница: 72 / 688

background image

d-Color MF4003/MF3303

D SERVICE TOOL > 2. Utility tool

D-2

2. Utility tool

2.1 IC card information setting tool of card reader

2.1.1 Outline

• Before connecting a card reader to the MFP, it is necessary to prepare an IC card information setting file with the loadable driver.
• To prepare this file, a tool is used for preparing the IC card information setting file for use in each card reader.

Card reader

IC card information setting file preparation tool

AU-201S

Auth Device Tool Advanced for AU-201/AU-201S

SCL-010

Auth Device Tool Advanced for SCL-010

OMNIKEY 5427CK (AU-205H)

Auth Device Advanced for 5427CK (AU-205H)

YSoft

Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3

System requirement of tools

OS

• Windows 7
• Windows 8.1
• Windows 10

Support both 32-bit (x86) and 64-bit (x64) editions.

Library (Any of these needs
to be installed)

• Microsoft .Net Framework2.0 SP2
• Microsoft .Net Framework3.0 SP2
• Microsoft .Net Framework3.5 SP1
• Microsoft .Net Framework3.5.1

Hard disk

3 MB or more free space is required

Display

800 x 600 pixels,16 bit full color

2.1.2 IC card information setting procedures

(1) Setting IC card information in the loadable driver in advance

(a) Auth Device Tool Advanced for AU-201/AU-201S

1.

Obtain the

loadable driver (ICC_LDR.tar) for use in AU-201S

that is compatible with the type of card used.

2.

Start the Auth Device Tool Advanced for AU-201/AU-201S.

3.

Select [Import Loadable Driver] from [File] and select the loadable driver.

4.

Select card type.

5.

If the card is good for detailed settings, click [Detail Setting/Extra Data Setting].

6.

Input the necessary extended data. (For details, ask the IC card administrator.)

7.

Select Loadable Driver in [Export Format] and click [Export].

8.

Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

9.

Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

10.

Call the Service Mode to the screen of the MFP.

11.

Select [System 2] -> [Driver Install] -> [Install].

12.

Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

13.

Select [Loadable driver] and touch the [Start] to install the loadable driver.

14.

Remove the USB memory and, accessing [Billing Setting] -> [Authentication Device 2], select [Card].

15.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

16.

Set the authentication user.

(b) Auth Device Tool Advanced for SCL-010

1.

Obtain the

loadable driver (ICC_LDR.tar) for use in SCL-010

that is compatible with the type of card used.

2.

Start the Auth Device Tool Advanced for SCL-010.

3.

Select card type.

4.

Select Loadable Driver in [Export Format] and click [Export].

5.

Select the loadable driver to be updated and the output location of the loadable driver and click [OK].

6.

Copy the output loadable driver (ICC_LDR.tar) to the root directory of the USB memory.

NOTE

▪ Please do not save any other data in the USB memory.

7.

Call the Service Mode to the screen of the MFP.

8.

Select [System 2] -> [Driver Install] -> [Install].

9.

Connect the USB memory in which the loadable driver has been saved to the USB port on the side of the control panel.

10.

Select [Loadable driver] and touch the [Start] to install the loadable driver.

11.

Remove the USB memory and, accessing [Billing Setting] -> [Authentication Device 2], select [Card].

12.

Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.

13.

Set the authentication user.

(c) Auth Device Tool Advanced for 5427CK (Setting: TypeA/HID Prox/Multiple)

NOTE

▪ Selecting [Multiple] makes cards of HID Prox, HID iCLASS and TypeA available at the same time.

1.

Obtain the

loadable driver (ICC_LDR.tar) for use in OMNIKEY 5427CK (AU-205H)

that is compatible with the type of card used.

2.

Start the Auth Device Tool Advanced for 5427CK (AU-205H).

3.

Select card type. (Except for HID iCLASS)

Service Manual

Y119930-3

«
...
70
71
72
73
74
...
»

Содержание d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для d-Color MF 4003

Бренд: Xerox Страницы: 110

Бренд: Xerox Страницы: 360

Бренд: Lanier Страницы: 138

Copycentre C118

Бренд: Xerox Страницы: 47

d-Color MF2613 Plus

Бренд: Olivetti Страницы: 375

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды