manualshive.com logo in svg

Olivetti d-Color MF 4003, Руководство по обслуживанию, Страница: 29 / 688

Поделиться
Скачать
Olivetti d-Color MF 4003 Скачать руководство пользователя страница 29

d-Color MF4003/MF3303

A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS

A-7

3.3  CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE

OLIVETTI

 brand products are extensively tested before shipping, to ensure that all

 

applicable 

safety standards are met, in order to protect the customer and customer engineer

 

(hereafter 

called the CE) from the risk of injury. However, in daily use, any electrical equipment

 

may be 

subject to parts wear and eventual failure. In order to maintain safety and reliability, the

 

CE 

must perform regular safety checks.

3.3.1  Power Supply

(1)  Connection to Power Supply

WARNING

▪ The power outlet should have a capacity of at

least the maximum power consumption and
be dedicated only to the product.

The current that can be passed through the
outlet is limited and any current exceeding
the limit could result in fire.

kw

▪ If the wall outlet has two or more receptacles

and the product and another electrical
appliance are plugged into this wall outlet,
make sure that the total load does not exceed
the rating of the wall outlet. The current that
can be passed through the outlet is limited
and any current exceeding the limit could
result in a fire.

Y119930-3

Service Manual

Содержание d-Color MF 4003

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов