Olivetti d-Color 201MF Скачать руководство пользователя страница 99

Страница: 99 / 120

18. Fusing section

Theory of Operation Ver. 1.0 Sep. 2008

bizhub C200

Composition/Operation

18.3.5

Fusing temperature control during a print job

A. Fusing heater lamp control

• Temperature setting for the fusing belt and the pressure roller varies depending on the

paper type and the copy/print mode in order to prevent declining of the image stability.

• To heat the fusing belt, both the heating roller heater lamp/L and heating roller heater

lamp/S are used. Either of them is energized to control the temperature.

• Either one of the heater lamps is turned ON to control the temperature of the fusing belt.

The two heater lamps can never be turned ON at the same time.

• Either the heating roller heater lamp/L or heating roller heater lamp/S is energized

depending on the fusing temperature, print mode, and paper type.

• To heat the pressure roller, the pressure roller heater lamp is used.

B. Fusing temperature control during printing.

• Fusing temperature control prevents declining of the image stability as well as reduces

curling of the paper, uneven waxing, offset, etc., according to the paper type to be used.

• Fusing temperature adjustment can be made from Service mode/Machine adjustment/

Fusing temperature.

• Adjust the fusing temperature at the heating side first. If the further adjustment is neces-

sary, adjust on the pressure side.

18.3.6

Temperature control during stand-by

• The standby temperature is controlled to accelerate the shift to the print control when a

print job is received.

• Each of the heater lamps is controlled to turn ON or OFF to ensure that the temperature

of the fusing belt and pressure roller falls within a predetermined temperature range.

18.3.7

Temperature control during low power mode

• Fusing temperature is controlled at a level lower in the low power mode than in the

standby state in order to reduce power consumption.

Paper type

Fusing belt

Pressure roller

Plain paper

- 20

C to + 5

C (step: 5

- 20

C to + 5

C (step: 5

OHP film

Thick paper 1

Thick paper 2

Thick paper 3

Thick paper 4

Envelopes

- 5

C to + 5

C (step: 5

- 5

C to + 5

C (step: 5

Theory of Operation Y109670-2

Содержание d-Color 201MF
























































































































Результаты поиска

Содержание d-Color 201MF

Отзывы:

Olivetti d-Color 201MF, Теория работы, Страница: 99 / 120

Результаты поиска

Содержание d-Color 201MF

Отзывы: